How do novices camp and set up tents?

The tents we buy are generally divided into automatic construction and manual construction. The automatic construction of tents is generally relatively simple. You don't need to build them. You just need to throw them away.

Manual tent building is professional and complex. You need to learn some building skills, but it is not very difficult. The operation method is as follows:

1. Open the package and take out the tent's outer tent, inner tent, tent pole, ground nail and windproof rope.

2. Connect the accounting rod, connect the accounting rod section by section into a whole rod.

3. According to the guidelines, hang the tent on the account pole, and the two account poles are in cross state.

4. Some tents are directly hung on the tent pole, while others need to put the tent pole into the tent. It depends on the type of tent you buy. Note that the tent is inserted here.

5. Slowly bend the accounting rod, insert the end into the pin ring or buckle it with bayonet.

6. Fix the internal account with ground nails

7. After the internal account is set up, the external account only needs to be covered by the internal account. Here, we need to keep the direction of the external account door and the internal account door consistent.

8. Fix the external tent firmly with windproof rope

Tip: We need to pay attention to the correct use of the ground nail. The ground nail must be inserted into the soil at an angle of 45 degrees outward, and the ground nail should be inserted into the soil as far as possible to prevent the exposed part from tripping people. At the same time, try to pull the windproof rope as hard as possible to separate the inner tent from the outer tent, so as to ensure the air circulation inside the tent and prevent rain or condensation water from falling into the tent.